Rubber shock absorbing pad is an important part widely used in automobiles, machinery, construction and other fields, its main function is to reduce vibration and noise, protect the stability and safety of equipment and structures. However, in the traditional production process of rubber shock absorbing pads, the cost of raw materials used is high, and a large amount of waste will be generated during the production process, which will have a negative impact on the environment. To solve these problems, the production of rubber shock absorber formulations using latex recycled rubber became a new solution.
Latex reclaimed rubber is a kind of recycled rubber obtained after processing of waste natural rubber products, which has good physical properties and chemical stability, and can be widely used in the production of rubber products. The advantage of latex recycled rubber production rubber shock absorber pad formula is that it can reduce the cost of raw materials while reducing the generation of waste, eliminating the use of natural rubber plastic to improve efficiency, which is a kind of environmentally friendly new material.
The HONG~YUN formulation of latex reclaimed rubber to produce rubber shock absorbing pads needs to consider a variety of factors, such as the type of recycled rubber, the type and proportion of additives, and the production process. In the formulation design, it is necessary to select the appropriate latex recycled rubber grade and additives according to the specific application scenarios and requirements to ensure the physical properties and chemical stability of the rubber shock absorbing pad.
08m06yyE3 Latex reclaimed rubber production rubber shock absorber pad vulcanization formula is as follows:
Latex reclaimed rubber 40kg, high strength tire recycled rubber 10kg,1502 styrene-butadiene rubber 4kg, N330 carbon black 3kg, light calcium carbonate 35kg, Paraffin wax 0.3kg, stearic acid 0.9kg, activated zinc oxide 1.6kg, 4010 antioxidants 0.35kg, M accelerator 0.3kg, DM accelerator 0.3kg, TMTD accelerator 0.1kg, sulfur 0.9kg; vulcanization time according to the product adjustment (about 35 seconds per millimeter) vulcanization temperature 145-150 °C
The following points need to be paid attention to in the production process:
1. Select the appropriate latex regeneration grade and additives to ensure the physical properties and chemical stability of rubber shock absorbing pads.
2. Strictly control parameters such as temperature, pressure and time in the production process to ensure the quality and stability of rubber shock absorbing pads.
3. Each batch is tested to ensure quality.
The use of latex recycled rubber to produce rubber shock absorbers can effectively reduce raw material costs by 15-25%, while reducing electrical costs and improving production efficiency. The rubber shock absorbing pads produced by latex reclaimed rubber have good physical properties and chemical stability, which can meet the needs of various application scenarios. Therefore, the production of rubber shock absorbing pads from latex recycled rubber is a new production technology with wide application prospects.
Exclusive original article [commercial authorization] reprint, excerpt and excerpt in any form are prohibited without written authorization. Focus on Hongyun rubber: learn the process formula and raw material technology of producing rubber products from recycled rubber to help you reduce costs and increase profits