EPDM Rubber Products

EPDM recycled rubber production rubber protective coil

Create Date:2016-12-12 11:03:37Click volume:1343
三元乙丙再生胶生产橡胶护线圈

Protecting coil Introduction: The rubber protective coil is a rubber product that is stuck on the metal plate, through the middle wire, and protects the wire from being cut by the metal plate. The raw materials are mostly styrene butadiene rubber, nitrile rubber, EPDM, neoprene rubber. And so on, raw material hardness between 35 --- 80 degrees.

Customer Information: A certain rubber and plastics product manufacturer in Guangdong specializes in producing various rubber pagoda-type protective coils, double-sided protective coils, porous outlet coils and other rubber protective coils of various shapes. The products have good elasticity and insulation, and are resistant to high and low temperatures. Anti-aging, market sales ahead of similar products.

Product use: Hongyun EPDM reclaimed rubber

Reclaimed rubber parameters: raw materials, imported EPDM head glue, unvulcanized raw rubber; gel content, 55%; color, black; tensile strength, 9.5Mpa; elongation at break, 400%; hardness, 58 degree.

Usage: Hongyun EPDM reclaimed rubber + glue (a small amount)

Use effect: Hongyun Sany EPDM reclaimed rubber fineness up to 80 mesh, good elasticity, high strength, high and low temperature resistance, anti-aging, high insulation, anti-corrosion; produced by the protective coil surface beautiful and shiny, with good The insulation, aging resistance, high temperature resistance, cold resistance, corrosion resistance and static resistance, have a long service life. The rubber protective coil products produced by Hongyun EPDM reclaimed rubber do not produce any irritating odor or polluting gas during production and use, and are favored by customers.

Economic benefits: Hongyun EPDM reclaimed rubber has lower price than raw rubber, which can reduce the cost of raw materials; reclaimed rubber products do not need to be plasticized in the raw rubber process, and can be mixed after fully plasticizing of EPDM raw materials. Industrial power. It is understood that the production of protective coils produced by Hongyun EPDM reclaimed rubber can meet the customer's demand, and the production cost is reduced by about 30%, and the profit of the manufacturers is obviously increased.

Experience: The price of the recycled EPDM rubber used by this customer is slightly higher than that of the ordinary sealing tape system EPDM reclaimed rubber on the market, but the parameters of the product are also high. It is used when producing rubber sheaths. The addition amount of original ethylene-propylene rubber can be greatly reduced, and the product performance is significantly improved. The manufacturer's most concerned production cost has not been increased due to the high price of EPDM, but has decreased by about 25%. Therefore, the friends of rubber products manufacturers do not use low-priced products for the sake of one ton and one hundred and eighty yuan when selecting reclaimed rubber, especially reclaimed rubber, which is obviously lower than the market price; the price of reclaimed rubber is not judged. The only standard for production costs.