Latex reclaimed rubber is the most popular reclaimed rubber product for natural rubber manufacturers. This is because latex reclaimed rubber has a high amount of rubber, almost the same properties as natural rubber, and can be well integrated with natural rubber, and can be directly replaced. Natural rubber rubber produces a variety of rubber products, and can also be used in combination with natural rubber to produce high-standard rubber products, significantly reducing raw material costs. At present, the quality of latex reclaimed rubber products is getting better and better. This is inseparable from the continuous improvement of the production process. Xiao Bian today described the production process of latex reclaimed rubber by taking the example of black latex reclaimed rubber as an example.
Waste natural rubber and waste latex products are difficult to smash. The traditional latex reclaimed rubber is produced by the oil method. The raw material of latex reclaimed rubber that has not been crushed is directly subjected to desulfurization under the steam pressure using the oil method, but this production process is produced. The quality of latex reclaimed rubber is uneven, and the quality tends to fluctuate. The advanced production technology produces filtered latex reclaimed rubber products with uniform mixing and stable quality.
Filter black latex reclaimed rubber production process: 1 Now the bulk waste latex products are pulverized by a pulverizer 2 The pulverized waste latex products are put in a desulfurization tank for high-speed crushing and oiling, and dynamic desulfurization is performed after discharging. 3 disinfection, the use of disinfectants to sterilize the rubber to achieve anti-corrosion effect. 4 Drying Dry the moisture in the rubber to avoid bubbles during the vulcanization of latex and influence the transparency of latex reclaimed rubber products. 5 Filtration, through the filter filter impurities in the rubber, improve the quality of black latex reclaimed rubber. 6 extrusion molding, the first compound in the kneader on the kneading machine in a sheet, and then when the rubber compound can roll roller and does not set the disk, the film surface is not a large hole, then refine the film immediately when refining.
Every process in the production process of black latex reclaimed rubber must be strictly controlled. Every detail is the key to the quality of latex reclaimed rubber. Only by strictly following the process and grasping every detail, can we maximize the performance advantages of waste latex products. , To ensure that the quality of the black latex reclaimed rubber produced can achieve the best results, and the quality of long-term stability.
Latex recycled rubber production process and production equipment has been continuously improving, and the quality of latex reclaimed rubber products will become better and better. At present, common latex reclaimed rubber products in the market include black latex reclaimed rubber, white latex reclaimed rubber, and red latex reclaimed rubber. High-quality latex reclaimed rubber products can contain up to 100% of the total amount of glue that can be 1:1. Replace natural rubber production rubber products, effectively reduce the cost of raw materials.
Exclusive original article [commercial authorization] reprint, excerpt and excerpt in any form are prohibited without written authorization. Focus on Hongyun rubber: learn the process formula and raw material technology of producing rubber products from recycled rubber to help you reduce costs and increase profits